The Kraft & Bauer fire suppressant system is designed for fitting onto any type of machine tool.
Faster detection of the source of the fire leading to the fire being more quickly suppressed
No endangering of personnel
Lower maintenance costs
Machines may be put back into full operation within minutes
Optional cabinets with the automatic weighing of Co2 cylinders that won't allow machines to be ran if the Co2 cylinder is empty
1
Microprocessor controlled extinguishing system control unit type FB703/704
2
Manual release
3
Visible and
acoustic alarm
4
UV or IR
flame detector
5
Thermal heat detector (70 or 90 degrees)
6
Extinguishant Cylinder with magnetic release valve
7
Flooding through CO2 extinguishant nozzles
8
Flooding through CO2 extinguishant bars (as an alternative for uncovered machines)
9
Optional Flooding of the mist extraction system that is fitted with an automatic shut-off flap to prevent flames from existing the machine into mist extraction units
10
Optional Pressure relief flap that safely releases a build-up of pressure that can be caused by the ignition of mist vapour and release of Co2 or argon gas within the machine.
